
Add to Cart
M12 17pin Female Panel Mount Connector With Pigtail ,A Coded M12 Flange Scoket IP68
Note | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
---|---|
Rated current at 40°C | 4 A |
Rated voltage | 48 V AC |
60 V DC | |
Number of positions | 5 |
Insulation resistance | ≥ 100 MΩ |
Coding | A - standard |
Standards/regulations | M12 connector IEC 61076-2-101 |
Signal type/category | Universal |
Status display | No |
Overvoltage category | II |
Degree of pollution | 3 |
Connection method | Screw connection |
Conductor cross section | 0.25 mm² ... 0.75 mm² (without ferrule) |
0.14 mm² ... 0.75 mm² (with ferrule) | |
0.25 mm² ... 0.75 mm² (solid) | |
Conductor cross section AWG | 24 ... 18 (without ferrule) |
26 ... 20 (with ferrule) | |
Insertion/withdrawal cycles | ≥ 100 |
Torque | 0.4 Nm (M12 knurl) |
0.2 Nm (Screw terminal blocks) | |
0.8 Nm ... 1 Nm (Pressure nut with coupling sleeve) | |
Tightening torque | Screw plug insert with sleeve housing as far it will go |
Assembly instructions | The wires can be connected both with ferrules and without ferrules |
Flammability rating according to UL 94 | HB |
---|---|
Contact material | CuZn |
Contact surface material | Au |
Contact carrier material | PA |
Material of grip body | Zinc die-cast, nickel-plated |
Material, knurls | Zinc die-cast, nickel-plated |
Sealing material | NBR |
Standards/specifications | M12 connector IEC 61076-2-101 |
---|---|
Connection in acc. with standard | CUL |
Flammability rating according to UL 94 | HB |
These M12 connectors may also be coded. The common used keyed types are:
A-Coded; used with Sensor Actuators
B-Coded; used with field buses
D-Coded; used with Industrial Ethernet
X-CoFurther information,pls contact us without hesitation.ded; used with10 Gbps Ethernet