Type A Solenoid Valve Connector PG9 PG11 Valve Plug Wirable 4 Pin IP65 Connector

Solenoid Valve Connectors Type A PG9 PG11 Valve Plug Wirable 4 Pin IP65 Connector Types

The solenoid valve controls the flow of the fluid from inlet port to the outlet port,and the outlet port is eventually connected to the process where the fluid is required. The body of the solenoid coil is cylindrical in shape, and it is hollow from inside. Solenoid valves are used wherever fluid flow has to be controlled automatically, they are being used to an increasing degree in the most varied types of plants and equipment.

* Indicator light shows power relay

* Screw-mount socket type A, gland size PG11

* Voltage rating of 24 V dc

* Current rating of 10 A

* Contact resistance of 20 mΩ

General Details

Contacts: 3+PE/2+PE

Connector design: Valve plug

Connector locking system: central bolt

Termination: screw clamp

Wire gauge (mm): min. 0,34 mm², max. 1,5 mm²

Wire gauge (AWG): min. AWG 22, max. AWG 16

Cable outlet: 6,0 - 8,0 mm

Upper limit temperature: 120 °C

Lower limit temperature: -30 °C

Electrical values

Rated current (40 °C): 10 A

Rated voltage: 250 V

Rated impulse voltage: 4000 V

Pollution degree: 3

Overvoltage category: III

Insulating material group: III

Volume resistivity: ≤ 15 mΩ

Insulation resistance: ≥ 10¹⁰Ω

EMC compliance: not shielded

Degree of protection: IP65

Mechanical operation: > 50 Mating cycles

Material

Contact material: CuSn (bronze)

Contact plating: Ni (nickel)

Contact body material: PA (UL 94 HB)

Housing material: PA

Component part drawing

Solenoid Valve Connector Series